Roundabouts are becoming common across the United States, replacing traffic signals and stop signs at intersections in cities, suburbs and rural areas. Many drivers still find them confusing, especially the multilane versions. The good news is that the rules are simple, and roundabouts are among the most effective safety improvements a community can make. Here is why they work and exactly how to drive through one with confidence.
Why Roundabouts Are Safer
At a traditional intersection, the most severe crashes are right-angle, left-turn and head-on collisions. In a modern roundabout, all traffic moves in one direction at low speed around a central island, which largely eliminates those crash types. According to the Insurance Institute for Highway Safety (IIHS), U.S. intersections converted from signals or stop signs to roundabouts saw injury crashes fall by 72% to 80% and all crashes fall by 35% to 47%. At higher-speed rural intersections, injury crashes dropped 85%.
IIHS also estimates that converting 10% of U.S. signalized intersections to roundabouts could have prevented more than 50,000 crashes in 2024, including 289 fatal crashes. Roundabouts also tend to reduce delays and idling because traffic keeps moving rather than waiting for a green light.
The Federal Highway Administration (FHWA) also lists roundabouts as a proven safety countermeasure. Citing the Highway Safety Manual, it reports a 78% reduction in fatal and injury crashes when a signalized intersection is converted to a roundabout, and an 82% reduction when a two-way stop-controlled intersection is converted.
Roundabout vs. Traffic Circle
Not every circular intersection is a modern roundabout. Older traffic circles and rotaries can be large, allow high speeds and sometimes give priority to entering traffic. Modern roundabouts are smaller, use curved approaches to slow you down and require entering vehicles to yield to traffic already circulating. If you are unsure which you are approaching, follow the signs and pavement markings.
Step by Step: Driving a Single-Lane Roundabout
- Slow down as you approach. Watch for the yellow roundabout warning sign and any advisory speed. Most roundabouts are designed for speeds of roughly 15 to 25 mph.
- Watch for pedestrians and cyclists. Crosswalks are usually set back one car length from the circle. Stop for anyone crossing.
- Yield to traffic already in the roundabout. Look to your left. When there is a safe gap, enter. You do not need to stop if the way is clear.
- Travel counterclockwise. In the U.S., you always go to the right of the central island.
- Do not stop inside the roundabout. Keep moving unless you need to avoid a collision.
- Signal right before your exit so drivers waiting to enter know your intention.
- Exit carefully and watch again for pedestrians at the exit crosswalk.
Handling Multilane Roundabouts
Multilane roundabouts require one more decision: choosing the correct lane before you enter. IIHS notes that some U.S. studies found smaller safety gains at two-lane roundabouts, and one Washington State study found crashes declined as drivers became familiar with them. Following lane guidance makes a big difference.
- Read the signs early. Lane-use signs and pavement arrows before the roundabout show which lanes go where.
- General rule: to turn right, use the right lane. To turn left or make a U-turn, use the left lane. To go straight, use the lane the arrows indicate, often either lane.
- Yield to both lanes of circulating traffic before entering.
- Stay in your lane. Do not change lanes inside the roundabout.
- Avoid driving next to large trucks. Trucks may need to use more than one lane to turn. IIHS advises not driving beside them in multilane roundabouts.
Emergency Vehicles, Trucks and Pedestrians
If an emergency vehicle approaches, do not stop inside the roundabout. If you have not entered, pull to the right and wait. If you are already circulating, continue to your exit, then pull over to let it pass. Large trucks often use the raised apron around the central island to make the turn, which is normal. Pedestrians should cross only at marked crosswalks and should never walk to the central island. Cyclists can either ride in the travel lane like a car or, where provided, exit to a shared path and cross as a pedestrian.
Common Mistakes to Avoid
- Stopping at the entry when the circle is clear, which can cause rear-end crashes.
- Entering without looking left for circulating traffic.
- Changing lanes or exiting from the inside lane across another vehicle in a multilane roundabout.
- Forgetting to look for pedestrians at the exit.
- Missing your exit and panicking. If you miss it, simply go around again.
Roundabouts in Bad Weather and at Night
The same rules apply in rain, snow and darkness, but give yourself more time. Slow down earlier on the approach, since curved entries and the circulating roadway can be slick, and leave extra space behind the vehicle ahead in case it stops to yield. Snow can cover lane markings in multilane roundabouts, so rely on the lane-use signs posted before the entry and stay in your lane. At night, watch carefully for pedestrians and cyclists in dark clothing at the crosswalks, which are usually set back from the circle. If a roundabout on your route is unfamiliar, preview it on a map before you leave so you know which exit you need. Counting exits as you pass them, rather than looking only for signs, helps you leave at the right road.
FAQ
Who has the right of way in a roundabout?
Vehicles already circulating have the right of way. Entering drivers must yield.
Should I signal when entering?
Signaling at exit is the key requirement in most states. Check your state driver’s manual for local rules.
Are roundabouts safe for pedestrians?
Generally yes. IIHS reports that pedestrian crashes in European roundabouts were about 75% lower on average, since vehicles move slowly and pedestrians cross one direction of traffic at a time.
Sources
Featured image: Petar Milošević / Wikimedia Commons, CC BY-SA 4.0